 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Z-Power LED X10490 Technical Data Sheet XS2180 Z-Power series is designed for high current operation and high flux output applications. Z-Power LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive large LCD backlights XS2180 Features * Super high flux output and high luminance * Designed for high current operation * Low thermal resistance * SMT solderability * Lead free product * RoHS compliant Applications * Mobile phone flash * Automotive interior / Exterior lighting * Automotive signal lighting * Automotive forward lighting * Torch * Architectural lighting * LCD TV / Monitor backlight * Projector light source * Traffic signals * Task lighting * Decorative / Pathway lighting * Remote / Solar powered lighting * Household appliances *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 Nov 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Full Code of Z-Power LED Series Full code form : X1 X2 X3 X4 X5 X6 - X7 X8 - X9 X10 X11 X12X13 1. Part Number - X1 : Color - X2 : Z-Power LED series number - X3 : LENS type - X4 : Chip quantity (or Power Dissipation) - X5 : Package outline size - X6 : Type of PCB 2. Internal Number - X7 - X8 3. Code Labeling - X9 : Luminous flux (or Radiant flux for royal blue) - X10 X11 X12 : Dominant wavelength (or x,y coordinates rank code) - X13 : Forward voltage 4. Sticker Diagram on Reel & Aluminum Vinyl Bag PART NO. : X1 X2 X3 X4 X5 X6 - X7 X8 QUANTITY : ### LOT NUMBER : ########## BIN CODE : X10 X11 X12 X13 X14 For more information about binning and labeling, refer to the Application Note -1 Rev. 00 Nov 2008 2 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Outline Dimension 1. Dome Type SLUG Cathode Mark Lens Body Lead Notes : 1. All dimensions are in millimeters. (tolerance : 0.2 ) 2. Scale : none 3. Slug of package is connected to anode. *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 Nov 2008 3 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 1. Pure White (WS2180) 1-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux [1] [3] Symbol V [2] CCT Ra [4] Value Min 60 3.0 Typ 70 6300 70 3.5 120 13 11.5 Max 4.0 Unit lm K V deg. C /W C /W Correlated Color Temperature CRI Forward Voltage View Angle Thermal resistance Thermal resistance [5] [6] VF 2 1/2 RJ-B RJ-C 1-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 500 2 145 -40 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance. [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. (25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC. [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink. Rev. 00 Nov 2008 4 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 2. Blue (BS2180) 2-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux [1] Symbol V [2] D VF 2 1/2 [5] [6] Value Min 455 3.0 Typ 15 460 3.5 130 13 11.5 Max 465 4.0 Unit lm nm V deg. C /W C /W Dominant Wavelength[3] Forward Voltage View Angle Thermal resistance Thermal resistance [4] RJ-B RJ-C 2-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 500 2 145 -40 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety Rev. 00 Nov 2008 5 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 3. Green (GS2180) 3-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant [1] Symbol V [2] D VF 2 1/2 [5] [6] Value Min 520 3.0 Typ 62 525 3.5 130 13 11.5 Max 535 4.1 Unit lm nm V deg. C /W C /W Wavelength[3] [4] Forward Voltage View Angle Thermal resistance Thermal resistance RJ-B RJ-C 3-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 500 2.05 145 -40 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sin Rev. 00 Nov 2008 6 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 4. Red (RS2180) 4-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant [1] Symbol V [2] D VF 2 1/2 [5] [6] Value Min 618 2.0 Typ 38 622 2.5 130 13 14.5 Max 630 3.0 Unit lm nm V deg. C /W C /W Wavelength[3] [4] Forward Voltage View Angle Thermal resistance Thermal resistance RJ-B RJ-C 4-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 400 1.2 100 -40 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink Rev. 00 Nov 2008 7 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 5. Amber (AS2180) 5-1 Electro-Optical characteristics at IF=350mA, TA=25C Parameter Luminous Flux Dominant [1] Symbol V [2] D VF 2 1/2 [5] [6] Value Min 585 2.0 Typ 37 590 2.5 130 14 15.5 Max 595 3.0 Unit lm nm V deg. C /W C /W Wavelength[3] [4] Forward Voltage View Angle Thermal resistance Thermal resistance RJ-B RJ-C 5-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 400 1.2 100 -40 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength [4] A tolerance of 0.06V on forward voltage measurements [5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C) RJ-C is measured with only emitter. .(25 C TJ 110 C) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. --------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink Rev. 00 Nov 2008 8 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Spectral Power Distribution Relative Spectral Power Distribution Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Color Spectrum, TA=25C 1. Pure White 1 .0 S ta n d a r d e y e r e s p o n s e c u r v e 0 .8 0 .6 0 .4 0 .2 0 .0 300 400 500 600 700 800 900 W a v e le n g th ( n m ) 2. Blue, Green, Red, Amber 1.0 0.8 0.6 0.4 0.2 0.0 400 500 Wavelength (nm) 600 700 Rev. 00 Nov 2008 9 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Light Output(%) Relative Light Output [%] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics 1. Relative Light Output vs. Junction Temperature at IF=350mA 120 100 80 60 40 20 Pure White Blue Green 25 50 75 100 O 0 125 150 120 Junction Temperature( C) 100 80 60 40 20 0 25 Red,Amber 50 75 o 100 Junction Temperature [ C] 10 Rev. 00 Nov 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Forward Voltage Shift[V] Dominant Wavelength Shift[nm] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics 2. Forward Voltage Shift vs. Junction Temperature at IF=350mA 0.0 -0.2 -0.4 -0.6 -0.8 Pure White, Blue Red,Amber Green 25 50 75 100 O -1.0 125 150 Junction Temperature [ C] 3. Wavelength Shift vs Junction Temperature at IF=350mA 6 5 R ed,Am ber Green Blue 4 3 2 1 0 25 50 75 100 o 125 150 Junction Temperature[ C] Rev. 00 Nov 2008 11 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Average Forward Current [mA] Average Forward Current [mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics 1. Forward Voltage vs. Forward Current , TA=25 c 500 Pure White, Blue, Green 400 300 200 100 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage [V] 400 Red, Amber 300 200 100 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage [V] Rev. 00 Nov 2008 12 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Lumious Flux(a.U) Relative Lumious Flux(a.U) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics 2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 c 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Pure White, Blue, Green 0 100 200 300 400 500 Forward Current [mA] 1.2 R ed, A m ber 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 400 Fo rw a rd C u rre n t [m A ] Rev. 00 Nov 2008 13 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Current [mA] Current [mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs Allowable Forward Current 1-1. Pure White, BLUE, GREEN (TJMAX = 145 C, @350mA) 400 350 300 250 200 150 100 50 0 RjaT = 60 C/W RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W o o o o 0 25 50 75 100 o 125 150 Ambient Temperature [ C] 1-2. Pure White, BLUE, GREEN (TJMAX = 145 C, @500mA) 600 500 400 300 RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W o o o 200 100 0 0 25 50 75 100 o 125 150 Ambient Temperature [ C] Rev. 00 Nov 2008 14 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Current [mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs Allowable Forward Current 2-1. RED, AMBER (TJMAX = 100 400 350 300 250 200 150 100 50 0 C, @350mA) RjaT = 60 C/W RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W o o o o 0 20 40 60 o 80 100 Ambient Temperature [ C] Rev. 00 Nov 2008 15 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative luminous flux Relative luminous flux Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Typical Dome Type Radiation pattern 1. Pure White 0 1.0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Angle(deg.) 2. BLUE, GREEN 0 1.0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Angle(deg.) Rev. 00 Nov 2008 16 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative luminous flux Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Typical Dome Type Radiation pattern 3. RED, AMBER 0 1.0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Angle(deg.) Rev. 00 Nov 2008 17 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Recommended Solder pad 1. Solder pad 2. Solder paste pattern Note : 1. All dimensions are in millimeters (tolerance : 0.2 ) 2. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 Nov 2008 18 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 150 ~ Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 3. Reflow Soldering Conditions / Profile 260 240 220 200 Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min) 180 Pre-heating Rising 5 C/sec Cooling -5 C/sec 0 Time [Hr] 4. Hand Soldering conditions Lead : Not more than 3 seconds @MAX280 Slug : Use a thermal-adhesives * Caution 1. Reflow soldering should not be done more than one time. 2. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones. Rev. 00 Nov 2008 19 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Emitter Type Reel Packaging Note : 1. The number of loaded products in the reel is 500ea 2. All dimensions are in millimeters (tolerance : 0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 00 Nov 2008 20 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Packaging Structure Aluminum Vinyl Bag PART NO. : ######-## QUANTITY : *** LOT NUMBER : #######-####### BIN CODE : ####### Outer Box TYPE SIZE(mm) a c b 350 350 370 c ZLED ZLED PART : WS2180-** PO CODE : ## Q'YT : ###### LOT NO : YMDD-##### DATE : ###### b a SEOUL SEMICONDUCTOR CO.,LTD Note : 1. 6~10 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 Rev. 00 Nov 2008 21 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet precaution for use * Storage To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box (or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30 degrees Centigrade. Humidity 50% maximum. * Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40 Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 605 * Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. * Please avoid rapid cooling after soldering. * Components should not be mounted on warped direction of PCB. * Anti radioactive ray design is not considered for the products listed here in. * Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. * This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. * When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature. * LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. * The appearance and specifications of the product may be modified for improvement without notice. * Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. * The slug is connected to the anode. Therefore, we recommend to isolate the heat sink. * Attaching LEDs, don't use adhesives to generate organic vapor. Rev. 00 Nov 2008 www.ZLED.com 22 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Handling of Silicone resin LEDs Z-Power LED is encapsulated by silicone resin for the highest flux efficiency. Notes for handling of Silicone resin Z-Power LEDs * Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers) * Avoid leaving fingerprints on silicone resin parts. * Dust sensitivity silicone resin need containers having cover for storage. * When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. * Please do not force over 2000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product * Please do not recommend to cover the silicone resin of the LEDs with other resin (epoxy, urethane, etc) Rev. 00 Nov 2008 23 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) |
Price & Availability of XS2180
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |